Ukrainian PCB Prototype & Fabrication Manufacturer

Since 2006, our company has been successfully working in the market of manufacturing of electronics and specializes in the design of radio-electronic equipment and the assembly of components on PCBs. The company has its own high-tech manufacturing facilities and offers customers the highest quality services.

We constantly cooperate with European suppliers of active electronic components, capacitors, resistors, LEDs, LCD panels, housings, fastening technology, as well as transformers, filters and other electronic components...

FILL THE FORM BELOW

and get a free consultation, as well as the calculation of the installation cost

List of documents for calculation

SMT and manual assembly of PCBs:

The service of assembling PCBs at our production facilities allows the customer to concentrate efforts on the main type of activity, to reduce production costs and the time for the new product to enter the market. All work is carried out in accordance with the requirements of the standard IPC-A-610D, the work is carried out according to the third class of quality (requirements of special machinery), all manufactured products undergo optical quality control, however, at the request of the customer, we can additionally monitor the Technical Conditions.

Order of consultation

Fill out the form, and we will contact you to answer all questions!

Your contact information is secure and will not be passed on to third parties!

Turnkey project:

A service that allows the customer to receive a semi-finished product at the outlet. We produce boards, we complete the product with a complete list of components and perform the installation. If necessary, we will make a full calculation of the project, which will allow us to calculate the cost of production.

All technical documentation is kept in the strictest secrecy and is not available to third parties. To calculate a turn-key project, you need to send the complete set of needed documents.

Order of consultation

Fill out the form, and we will contact you to answer all questions!

Your contact information is secure and will not be passed on to third parties!

A set of documentation required for the calculation of installation:

Assembly drawing (preferred PDF format). The assembly drawing should contain a graphic image of the board with the mounted elements, information about the polarity of the polar elements and indication of the orientation (the position of the first output) of the microcircuits. The item designations in the assembly drawing must conform to the specification and the reference designations in the Peak-and-Place file.

If the installation is carried out from two sides, then an assembly drawing is required for each side.

Specification (preferred Excel format). The components that are specified in the specification and of that type and denomination, regardless of what is indicated in the CAD files, will be mounted on the board. If other types of components can be provided for installation, then specify their types as a possible replacement.

Each line of the specification must contain the following information:

list of the reference designations of the same components;
type of components, including denomination;
description or comment;
type of shell;
number of components.

Pick-and-Place - file containing a complete list of mounted SMD-elements, their coordinates, angles of rotation and side (with two-way editing). The Pick-and-Place file is required for the development of an automatic installation program for SMD elements. This file is generated by the CAD program in the form of a report, if you are at a loss to form it correctly - we can do this ourselves if there is an initial CAD file of the printed circuit board.

The valid file formats are CSV or XLS. The files must contain at least 6 columns: a reference designation, an element type (including the nominal value), X is the coordinate of the center of the element, the Y-coordinate of the element's center, the angle of rotation, the mounting side. In addition to the list of elements, there must be lines with the coordinates of the reference points, also indicating the side of the installation. There must be at least two reference points for each side of the installation. When using the CSV format, the column separators must differ from the separators of the integer and fractional part of the coordinates, and also do not have any other matches in the contents of the columns.

Gerber files (GBR or CAM350) for solder paste application for each side of SMD-mounting (TopPaste.gbr, BottPaste.gbr). The files are necessary for the development of stencils for the application of solder paste.

It's better if you give us the CAD-file (PCAD or Altium) of the board, and we will create the necessary files ourselves. If you want to do it yourself, we recommend that you familiarize yourself with the requirements for the construction of stencils in the standard IPC-7525A. In the case of a panel card, you need the panel files (rather than for a single board) or the exact paneling data: the number of rows, columns, the exact repetition step in the rows and columns, the orientation of the board in the panel.

For the calculation of the installation, archive all the necessary documentation and attach the archive to the feedback form. We will study the project and get back to you!

ELECTRONICS MANUFACTURING

WHAT WE CAN DO

WHY CUSTOMERS CHOOSE US

EXAMPLES OF OUR WORKS

HOW OUR WORK IS ORGANIZED

HOW TO CONTACT US